SSC JE Civil – 15 Nov 2022 – Shift-1

Welcome to your SSC JE Civil - 15 Nov 2022 - Shift-1

General Intelligence and Reasoning

  1. Select the number from among the given options that can replace the question mark (?) in the following series.

241, 208, 171, 130, 85, ?

General Intelligence and Reasoning

2. Arrange the following words in a logical and meaningful order.

1. Stratosphere

2. Mesosphere

3. Ionosphere

4. Thermosphere

5. Troposphere

6. Exosphere

General Intelligence and Reasoning

3. Select the option that represents the correct order of the given words as they would appear in an English dictionary.

1. Fasting

2. Fascinating

3. Fashionable

4. Faux

5. Fault

6. Farther

7. Father

General Intelligence and Reasoning

4. Which of the following numbers will replace the question mark (?) and complete the given number series?

42, 43, 48, 57, 74, 99, ?

General Intelligence and Reasoning

5. Select the correct mirror image of the given figure when the mirror is placed at 'AB' as shown.

General Intelligence and Reasoning

6. How many triangles are there in the given figure?

General Intelligence and Reasoning

7. If A denotes '+', B denotes '×', C denotes '−', and D denotes '÷', then what will be the value of the following expression?

126 C 6 B 22 A 63 D 9 = ?

General Intelligence and Reasoning

8. Select the word-pair that best represents a similar relationship to the one expressed in the pair of words given below. (The words must be considered as meaningful English words and must NOT be related to each other based on the number of letters/ number of consonants/vowels in the word)

Servant ∶ Master

General Intelligence and Reasoning

9. Which of the following letter-clusters will replace the question mark (?) in the given series?

ADV, EBX, IXZ, ORB, ?

General Intelligence and Reasoning

10. In a certain code language, 'PAPERS' is written as 'VFTHTT' and 'CUTTER' is written as 'IZXWGS'. How will 'JUNGLE' be written in that language?

General Intelligence and Reasoning

11. Select the option that is related to the third word in the same way as the second word is related to the first word. (The words must be considered as meaningful English words and must not be related to each other based on the number of letters/number of consonants/vowels in the word)

India ∶ Asia ∶∶ Brazil ∶ ?

General Intelligence and Reasoning

12. ‘A + B’ means ‘A is the brother of B’.

‘A – B’ means ‘A is the mother of B’.

‘A × B’ means ‘A is the husband of B’.

‘A ÷ B’ means ‘A is the sister of B’.

If C × M – S + K ÷ T – Q, then which of the following statements is NOT correct?

General Intelligence and Reasoning

13. Select the correct combination of mathematical signs to sequentially replace the * signs and to balance the given equation.

5*16*23*70*33

General Intelligence and Reasoning

14. In a code language, 'cake has sugar' is written as 'est bon wig', 'a slice of cake' is written as 'bleu eau tuf wig', 'sugar is sweet' is written as 'lat gif bon'. What is the code for the word 'has' in this language?

General Intelligence and Reasoning

15. A # B means ‘A is the Brother of B’

A @ B means ‘A is the daughter of B’

A & B means ‘A is the husband of B’

A % B means ‘A is the wife of B’

If L # M @ P # Q & Z, then how is Q related to L?

General Intelligence and Reasoning

16. Select the option that is related to the third word in the same way as the second word is related to the first word. (The words must be considered as meaningful English words and must not be related to each other based on the number of letters/number of consonants/vowels in the word.)

Eiffel Tower ∶ France ∶∶ Great Wall ∶ ?

General Intelligence and Reasoning

17. Which of the given letter-clusters will replace the question mark (?) in the following series?

EUZB, ISXE, MQVH, ?, UMRN

General Intelligence and Reasoning

18. Which of the given letter-clusters will replace the question mark (?) in the following series?

MEBH, QGDK, UIFN, ?, CMJT

General Intelligence and Reasoning

19. Select the figure from the options that can replace the question mark (?) and complete the pattern.

General Intelligence and Reasoning

20. Select the figure from the options that can replace the question mark (?) and complete the pattern (rotation is NOT allowed).

General Intelligence and Reasoning

21. Which of the following numbers will replace the question mark (?) in the given series?

7, 10, 22, 49, 97, ?

General Intelligence and Reasoning

22. Select the option that indicates the correct arrangement of the given words in the order they appear in an English dictionary.

1. Declivity

2. Decipher

3. Decapitate

4. Deception

5. Debauch

6. Decompose

General Intelligence and Reasoning

23. Which of the following interchange of signs would make the given equation correct?

20 + 20 × 20 − 20 ÷ 20 = 20

General Intelligence and Reasoning

24. Two statements are given, followed by two conclusions numbered I and II. Assuming the statements to be true, even if they seem to be at variance with commonly known facts, decide which of the conclusions logically follow(s) from the statements.

Statements:

All gems are stones.

Some gems are diamonds.

Conclusions:

I. Some stones are gems.

II. Some stones are diamonds.

General Intelligence and Reasoning

25. A person starts from point G and moves10 km West. He turns left and moves 5 km, turns left again, and moves 5 km, then turns right and moves 3 km and takes a final left turn and moves 5 km to reach a point F. How much and in which direction does he need to move now to reach point G?

General Intelligence and Reasoning

26. Arrange the following in a logical and meaningful order.

1. Trouser

2. Shirt

3. Socks

4. Headgear

5. Necklace

General Intelligence and Reasoning

27. There are seven students M, N, O, P, Q, R and S. Each scored different marks in a test. P scored higher marks than only three students. S scored higher than M. N scored higher than P. Q scored higher than R, who scored the least marks among all. M scored higher than N. O scored higher than Q. Who is at the third position from the top among all?

General Intelligence and Reasoning

28. Select the option that is related to the fourth term in the same way as the first term is related to the second term and fifth term is related to sixth term.

181 ∶ 10 ∶∶ ? ∶ 11 ∶∶ 265 ∶ 12

General Intelligence and Reasoning

29. Select the set in which the numbers are related in the same way as are the numbers of the given sets.

(NOTE: Operations should be performed on the whole numbers, without breaking down the numbers into its constituent digits. E.g. 13 – Operations on 13 such as adding /subtracting /multiplying etc. to 13 can be performed. Breaking down 13 into 1 and 3 and then performing mathematical operations on 1 and 3 is not allowed.)

(182, 118, 65)

(236, 172, 119)

General Intelligence and Reasoning

30. A paper is folded and cut as shown. How will it appear when unfolded?

General Intelligence and Reasoning

31. Town A is to the south-west of Town B. Town C is to the south of Town M. Town A is to the south-east of Town C. Town D is to the north of Town B. Town M is to the west of Town D. What is the position of Town M with respect to Town B?

General Intelligence and Reasoning

32. Which letter-cluster will replace the question mark (?) to complete the given series?

FTYG, IXDM, ?, OFNY, RJSE

General Intelligence and Reasoning

33. Arrange the following cricket equipment in a logical and meaningful order.

1. Shoes

2. Helmet

3. Thigh guard

4. Chest Guard

5. Shin pad

General Intelligence and Reasoning

34. Select the word-pair that best represents a similar relationship to the one expressed in the pair of words given below.

(The words must be considered as meaningful English words and must not be related to each other based on the number of letters/number of consonants/vowels in the word.)

Temperature ∶ Kelvin

General Intelligence and Reasoning

35. Which letter cluster will replace the question mark (?) to complete the given series?

EAHU, KQTC, ?, WWRS, CMDA

General Intelligence and Reasoning

36. Select the option figure that will replace the question mark (?) in the figure given below to complete the pattern.

General Intelligence and Reasoning

37. In a code language, ‘PURE’ is written as ‘NSPC’ and ‘WHITE’ is written as ‘UFGRC’. How will ‘COLOUR’ be written in that language?

General Intelligence and Reasoning

38. In a certain code language, ‘THOUSAND’ is written as ‘8201379271424’ and ‘VARIABLE’ is written as ‘627101927261623’.How will ‘UMBRELLA’ be written in that language?

General Intelligence and Reasoning

39. Seven people, A, B, C, D, E, F and G, are sitting in a straight row, facing the north. Only two people sit to the left of G. Only two people sit between A and F. A sits to the left of F. D is an immediate neighbour of F to the right. Only one person sits to the right of B. E is not an immediate neighbour of G. Who sits to the immediate left of F?

General Intelligence and Reasoning

40. A paper is folded and cut as shown. How will it appear when unfolded?

General Intelligence and Reasoning

41. Which of the following interchanges of numbers would make the given equation correct?

30 × 5 ÷ 25 + 16 + 10 = 20

General Intelligence and Reasoning

42. Seven students P, Q, R, S, T, U and V are sitting around a circular table facing the centre. R is an immediate neighbour of both T and U. S is sitting third to the left of R and immediate right of P. P is sitting second to the right of T. Q is an immediate neighbour of both T and P. V is immediate left of U. What is the position of P with respect to V?

General Intelligence and Reasoning

43. Select the correct mirror image of the given figure when the mirror is placed at 'AB' as shown.

General Intelligence and Reasoning

44. Select the option that is related to the fifth letter-cluster in the same way as the second letter-cluster is related to the first letter-cluster and the fourth letter-cluster is related to the third letter-cluster.

FRANCE ∶ QEZMDB ∶∶ DEMAND ∶ DCLZCM ∶∶ PRINCE ∶ ?

General Intelligence and Reasoning

45. Select the option that is related to the third number in the same way as the second number is related to the first number and the sixth number is related to the fifth number.

18 ∶ 333 ∶∶ 14 ∶ ? ∶∶ 22 ∶ 495

General Intelligence and Reasoning

46. Select the option that is related to the third term in the same way as the second term is related to the first term and the sixth term is related to the fifth term.

2 ∶ 10 ∶∶ 9 ∶ ? ∶∶ 4 ∶ 66

General Intelligence and Reasoning

47. Select the figure from the options that can replace the question mark (?) and complete the pattern.

General Intelligence and Reasoning

48. Three different positions of the same dice are shown. Find the number on the face opposite to the face showing 4.

General Intelligence and Reasoning

49. Select the option that is related to the third term in the same way as the second term is related to the first term and the sixth term is related to the fifth term.

347 ∶ 668 ∶∶ 284 ∶ ? ∶∶ 415 ∶ 736

General Intelligence and Reasoning

50. In this question, three statements are given, followed by two conclusions numbered I and II. Assuming the statements to be true, even if they seem to be at variance with commonly known facts, decide which of the conclusion(s) logically follow(s) from the statements.

Statements:

All consonants are vowels.

Some vowels are alphabets.

All alphabets are words.

Conclusions:

I. All consonants are alphabets.

II. Some vowels are words.

General Awareness

1. Which is a commonly used antimicrobial preservative in food and beverages, especially carbonated beverages, as it presents its strongest antibacterial activity at pH 2.5 – 4.0?

General Awareness

2. Which of the following is NOT an objective of measuring Primary Deficit of the government?

General Awareness

3. To obtain an estimate of borrowing on account of current expenditures exceeding revenues

General Awareness

4. Hunter Commission, 1882 was related to development of ________ in colonial India.

General Awareness

5. Which of the following options is correctly matched?

General Awareness

6. Which Article of the Constitution of India empowers High Courts to issue writs?

General Awareness

7. Electron microscopic studies of eukaryotic cells reveal the presence of a network of tiny tubular structures scattered in the cytoplasm that is called the ________.

General Awareness

8. Under Rail Kaushal Vikas Yojana, launched in September 2021, how many candidates will be provided training in four trades viz Electrician, Welder, Machinist and Fitter, over a period of three years?

General Awareness

9. In which of the following states did the Moplah Rebellion take place?

General Awareness

10. The evidences of the Mauryan Empire are quoted in the texts of Megasthenes who was an ambassador in the court of:

General Awareness

11. ________ won the ESPNcricinfo ‘Test Batting Award’ 2021.

General Awareness

12. ________ in the IUPAC nomenclature system is considered to be a derivative of hydrocarbons in which a hydrogen atom is replaced by -OR -OAr groups, where R and Ar represent alkyl and aryl groups, respectively.

General Awareness

13. As of February 2020, which of the following players has won the highest number of tennis grand slam men singles category tournaments?

General Awareness

14. Which of the following statements is INCORRECT about migration in India?

General Awareness

15. What chemical reactions occur when the proteins and sugars in and on your food are changed by heat, creating new tastes, aromas and colours?

General Awareness

16. Indian shooter Singhraj Adhana won the bronze medal in the men's ________ air pistol SH1 class at the Tokyo 2020 Paralympics.

General Awareness

17. In the early 20th century, who among the following published a paper explaining the theory that continental landmasses ‘flowed’ over the Earth, sometimes plowing through the oceans and into each other?

General Awareness

18. D' in AIDS stands for:

 

General Awareness

19. Which of the following countries are covered by the Amazon rain forest?

General Awareness

20. Which of the following is an example of a flow variable?

General Awareness

21. Gaur Maria is an important ritualistic dance from which state?

General Awareness

22. When did John Dalton publish a paper titled 'A New System of Chemical Philosophy' describing principles such as the uniqueness of atoms of the same element, relative atomic mass and the laws of chemical combination?

General Awareness

23. Which metal is used for making bulb filaments?

General Awareness

24. What is the most common symptom of osteomalacia?

General Awareness

25. Which is the programme launched by the Government of India in 2020, focusing on making India a self-sufficient country?

General Awareness

26. Why do low-pressure trough over the northern plains of India become weaker during October-November?

General Awareness

27. Who among the following clinched gold medals in the men's youth competition at the Asian Youth and Junior Boxing Championships in Amman, Jordan held in March 2022?

(i) Vishwanath Suresh

(ii) Vanshaj

General Awareness

28. Which Article of the Constitution of India abolishes the concept of ‘titles’ and says “no title (except for military and academic titles) shall be conferred by the State”?

General Awareness

29. Which of the following river is known as Ponnani in Kerla and has a total drainage area of the basin as 6,186 sq. km?

General Awareness

30. Upon the fragmentation of Bahmani Kingdom, the sultanate of Bijapur was founded by ________.

General Awareness

31. The flow of nutrients and energy from one organism to another at different trophic levels is known as:

General Awareness

32. Which of the following states rank first and second, respectively, in population, according to the Census 2011?

General Awareness

33. In the Fourth Five-Year Plan, how many Indian Scheduled Commercial Banks were nationalised?

General Awareness

34. Pandit Ram Narayan, an Indian musician, was credited with popularising the musical instrument ________ as a solo concert instrument.

General Awareness

35. The National Multidimensional Poverty Index is released by the _________.

General Awareness

36. In 1856, Berthelot synthesised which compound by the reaction of a mixture of sulfated hydrogen with carbon disulfide on red-hot copper?

General Awareness

37. _________ defeated the Indian Railway 3 - 0, to win the men’s title at the Senior National Volleyball Championship 2021-22.

General Awareness

38. In 2020, President of _________, Jair Bolsonaro, was called as the chief guest to the Republic Day celebration of India.

General Awareness

39. Which of the following is a major component of Compressed Natural Gas?

General Awareness

40. In which year was the National Tansen Samman instituted?

General Awareness

41. Which of the following sports is the Sultan Azlan Shah Cup related to?

General Awareness

42. Which of the following Constitutional amendments entered the Fundamental Duties in the Indian Constitution?

General Awareness

43. Which of the following Articles of the Indian Constitution provides that no child below 14 years of age shall be employed to work?

General Awareness

44. The ‘Right to Work’ plan, under the National Rural Employment Guarantee Act, 2005, was implemented in how many districts in the first phase?

General Awareness

45. Which of the following is NOT a pesticide?

General Awareness

46. Which year census is the 15th National census survey conducted by the Census Organisation of India?

General Awareness

47. According to the World Bank, what was the literacy rate of the total adult population (% of people ages 15 and above) in 2019 in Pakistan?

General Awareness

48. Condensation is the process of the transformation of:

General Awareness

49. An image formed with a lens that can be projected onto a screen is called:

General Awareness

50. In 2022, which state government launched the "Naan Mudhalvan Scheme" which aims to equip about 10 lakh youth across the State annually with skills that will help them realise their talents for the benefit of the country?

General Engineering

1. The hydraulic radius of a circular sewer of internal diameter 100 cm, running in fully occupied cross section is given by:

General Engineering

2. According to IS 800 - 2007 ,in the design of a tension member using bolted connections, the net area required to carry the design load t is given by equation __________.

Where

An = net cross sectional area required

fu = yield stress in steel

General Engineering

3. The machines which transform a power input (e.g. from an electric motor) into a hydraulic power output are:

General Engineering

4. Consider the following statements regarding standard measurement book and ordinary measurement book. Which of the following options is/are true?

i. Standard measurement books show only the measurement of building works.

ii. Ordinary measurement books are used for the purpose of checking the bills of contractor while standard measurement books are helpful in preparing repair estimates.

iii. Ordinary measurement books are numbered alphabetically while standard measurement books are numbered numerically.

General Engineering

5. The length of one rail is 15 m and the number of sleepers per rail length is 22. Find the expression for sleeper density and also find the number of sleepers required for the construction of 525 m of track.

General Engineering

6. A plate at a distance of 0.03 mm from a fixed plate moves at 0.8 m/s and requires a force of 1.50 N/m2 area of plate. Determine the dynamic viscosity of liquid between the plates.

General Engineering

7. Flat, gravitational and hump yard are the types of:

General Engineering

8. While designing a concrete mix, if 5 % of the results are allowed to fall below the characteristic strength and if the assumed standard deviation is 6 MPa, then what will be the Target mean strength (TMS) (MPa) of M40 grade of concrete?

General Engineering

9. The failure plane in direct shear test is the _________.

General Engineering

10. According to IS 800:2007, beams shall be designed and checked for:

General Engineering

11. Levelling in which staff and readings and the distance between the points is required is called:

General Engineering

12. In a level crossing, the canal and the drainage meet each other at ________ level.

General Engineering

13. For a closed pentagonal traverse, the sum of measured angles came out be 545°. Angle A calculated by measured bearings was 50°. What will be the corrected angle A?

General Engineering

14. The process of stones which includes excavating, wedging, heating and blasting is called:

General Engineering

15. With respect to plane table surveying, the terms ‘triangle of error’, ‘great circle’, ‘great triangle’ are related to:

General Engineering

16. If the pessimistic estimate of a project is Rs. 12 Cr, the optimistic is Rs. 9 Cr and the most likely estimate is Rs. 10 Cr, then the expected value (Rs. in Cr) would be

General Engineering

17. As per IS (383-1970), in how many zones are the Grading limits of fine aggregates distributed?

General Engineering

18. According to IS 287 ∶ 1993, in classifying timber, the average annual relative humidity ( %) of Zone IV region of India is more than:

General Engineering

19. Which of the following statements in the context of a circular sewer of full depth ‘D’ is correct?

General Engineering

20. Long wall-short wall method is also called __________.

General Engineering

21. There are two types of energy losses through pipes, major losses and minor losses. Major losses through pipes are due to _________.

General Engineering

22. Which of the following methods is used to calculate average precipitation over a catchment area?

General Engineering

23. A combination of two or more pipes connected end-to-end (series) is known as pipe in series. For pipes in series, the discharge through the pipe is _________.

General Engineering

24. Corrosion in reinforced concrete structures affects the structural durability due to:

General Engineering

25. A channel is said to be the most economical section when, it gives maximum discharge for a given area and slope. What is the relation between hydraulic radius and depth for the most economical trapezoidal section?

General Engineering

26. Which of the following physical inspection test apparatus is used for determining the Cement Initial and final setting times?

General Engineering

27. As per IS ∶ 2386 (part - III) - 1963, the following formula of aggregates is given for: _________ =

General Engineering

28. A circular beam section is subjected to a shear force of 40π kN. The maximum shear stress allowed in the material is 6 MPa. Calculate the safe diameter of the section, assuming a factor of safety equal to 2.

General Engineering

29. As per Indian Standard (IS 383 ∶ 2016), the grading of fine aggregates is divided into how many zones?

General Engineering

30. The Indian Parliament passed a Central Legislation named Air Pollution Control Act in the year:

General Engineering

31. Which of the following is an INCORRECTLY stated assumption in the theory of simple bending of beams?

General Engineering

32. The junk or demolition value of a structure, calculated at the end of its utility span, that has lost all of its structural strength and is near to its demolition is called:

General Engineering

33. Which of the following statements is correct with respect to modulus of rigidity?

General Engineering

34. Chezy’s coefficient (C) is related to Manning’s roughness coefficient (n) as ________.

General Engineering

36. For a BG track with M+5 sleeper density, find the number of fish plates required for 1 km of track.

General Engineering

36. Which level has internal compensator mechanism to automatically adjust the line of sight?

General Engineering

37. Chemical compounds such as Dichloro-diphenyl trichloro-ethane (DDT) are applied on wood for the prevention of:

General Engineering

38. Which of the following is NOT a function of GPS?

General Engineering

39. Which of the following is NOT a method for estimating deflections in beams?

General Engineering

40. A combination of two or more pipes connected between two points so that the discharge divides at the first junction and re-joins at the next is known as _________.

General Engineering

41. In granular materials, the resistance to sliding on any plane within the soil mass depends upon the _________.

General Engineering

42. The meridians that are parallel to the directions taken by freely moving magnetized needles, as in a compass are called as:

General Engineering

43. A simply supported beam of length L is associated with two point loads, each of magnitude P, acting at one third of span from either end as per the following diagram. Calculate the magnitude of bending moment acting at the left end support.

General Engineering

44. Which of the following oxides is present in highest proportion in Ordinary Portland cement?

General Engineering

45. Which the following is NOT an assumption of Rankine Theory?

General Engineering

46. If the perimeter of traverse is 2000 m and the amount of closing error is 10 m, then the relative closing error would be:

General Engineering

47. For 45-degree cranked or bend up bar, the inclined additional length of crank is equal to:

General Engineering

48. The clear minimum perpendicular distance between the inner faces of two rails is called as:

General Engineering

49. In oven drying method, the soil sample is kept in the oven for about ________ hours.

General Engineering

50. Defective outlet and head regulator, along with inadequate slope and not-regime section result in __________ of the channel.

General Engineering

51. Inglis formula for the calculation of peak drainage discharge is applicable to:

General Engineering

52. On which of the following factors does the duty of irrigation water NOT depend?

General Engineering

53. For an isotropic homogeneous body, the ratio of lateral strain to axial strain is called as:

General Engineering

54. According to IS 456, the anchorage value of a standard U-type hook shall be equal to X times the diameter of the bar, where X is:

General Engineering

55. X is the measure and adjustment of price levels for goods and services across a broad sector of the economy, where X is:

General Engineering

56.The specific gravity of soil solids is determined by:

General Engineering

57. If a structural steel member having an ultimate strength of 1100 units is to be designed for resisting buckling, then the design strength to be considered as per the Indian standard shall be:

General Engineering

58. The capacity of doing work by a skilled labour in the form of quantity of work per day is known as ________.

General Engineering

59. During painting, white lead is added to paint and it acts as:

General Engineering

60. In which type of barrier is most of the ponding done by gates and smaller or nil part of it is done by the raised crest?

General Engineering

61. During a concrete mix design process, what happens to its free maximum water cement ratio when grades of concrete is increased?

General Engineering

62. Consider the following statements with regard to cubical content method.

I. Length and breadth should be taken as the external dimensions of the buildings at floor level.

II. Height should be taken from floor level to the top of the roof.

Which of the following options are true?

General Engineering

63. The RL of a point is 120 m and elevation of the instrument is 1 m. If a contour line of 119 m is to be plotted, the reading on the staff should be:

General Engineering

64. What will be the effective length of a discontinuous strut comprised of a single angle connected with more than one bolt in the plane of gusset?

Given: L is the actual length of the strut.

General Engineering

65. The value of the property recorded in the municipality register for analysing the municipal taxed amount to be collected from the owner is called _________.

General Engineering

66. If R is the horizontal distance and d is the diameter of the earth, then usually the correction due to curvature in levelling is given by

General Engineering

67. Which of the following will have more viscous bitumen?

General Engineering

68. Seashore gravels are of which of the following types?

General Engineering

69. The phenomenon of increase in the volume of a given mass of sand caused by the films of water pushing the sand particles apart is referred to as:

General Engineering

70. A good building stone should have which of the following qualities?

i. Uniform texture

ii. Strength

iii. Fire resistance

iv. Hardness

General Engineering

71. Upon a detailed topographical investigation, an engineer wants to align a canal. Along which of the following should be align the canal?

General Engineering

72. Which of the following is NOT the most common laboratory methods for determining the coefficient of permeability of soils?

General Engineering

73. If (W1) is the weight of brick at room temperature and (W2) is the brick weight after the brick immersion in water for 24 hours, then the percentage of brick water absorption is calculated as:

General Engineering

74. Which of the following components of the weir divides the river width into weir portion and under sluices pocket?

General Engineering

75. The characteristic strength of concrete is defined as the strength of material below which NOT more than X percent of the test results are expected to fall, where X is:

General Engineering

76. Select the correct statement with respect to oval or egg shaped sewers.

General Engineering

77. The rolled steel I-sections are most commonly used as beams because of which of the following reasons?

General Engineering

78. The stage of plate laying in track construction includes:

General Engineering

79. A rectangular suppressed weir is a device used to measure stream flow in an open channel. For a rectangular suppressed weir flowing free, the discharge Q is related to the head H over the weir as _________.

General Engineering

80. Which of the following is NOT a method of noise abatement and control?

General Engineering

81. Due to which of the following reasons is reinforcement installed during the construction of concrete pipelines?

General Engineering

82.  Which of the following bogue compounds in OPC responsible for progressive strength by slow hardening and releasing less heat of hydration?

General Engineering

83. The objective of lime-soda softening process is:

General Engineering

84. In traversing by included angle method, which of the following is correct?

i. If the direction of progress is counter clockwise, the included angles measured clockwise are interior angles.

ii. If the direction of progress is clockwise, the included angles measured clockwise are interior angles.

iii. If the direction of progress is counter clockwise, the included angles measured clockwise are exterior angles.

iv. If the direction of progress is clockwise, the included angles measured clockwise are exterior angles.

General Engineering

85. The method that measures changes in the price of inputs to the construction process by monitoring separately the cost of each factor is called as:

General Engineering

86. The maximum bulking of sand occurs at a water content between _________.

General Engineering

87. Which of the following formulas is used for calculation of earthwork volume and is also known as the average end area formula?

General Engineering

88. A carpet area which includes the inner walls and balcony of the structure at floor is called ________.

General Engineering

89. In the design of a cantilever beam, main steel reinforcement is provided along ________ face of the beam.

General Engineering

90. The sprinkler irrigation method for water distribution is most suitable:

General Engineering

91. _________ condition develops in saturated thick layer of loose fine sandy soils, when disturbed due to vibration from pile driving in adjoining area or by pressure of flowing water.

General Engineering

92. According to the assumptions made in the limit state method of design of a compression member, The maximum compressive strain in concrete under axial compression is _________.

General Engineering

93. Identify the correct expression with respect to depth of beam in RC structures.

Where

D = Overall depth of beam

d = Effective depth of beam

d’ = Effective cover

General Engineering

94.  In structural steel construction, the distance between centre of fasteners shall NOT be less than X times the nominal diameter of the fastener, where X is:

General Engineering

95. A water supply pipe with a diameter of 0.5 m conveys 0.8 m3/sec of water from a source, where the lowest water level is at RL 92.00 m to a reservoir level where it is delivered at RL 108.00 m. The distance between source and supply is 500 m and the friction factor of a pipe is 0.03. Calculate the static head required to calculate the capacity of the pump.

General Engineering

96. As per IRC, which of the following is NOT a recommended characteristic of the road shoulder?

General Engineering

97. Select the incorrect statement regarding biomedical wastes segregated into red coloured bins as per Indian Rules, 1998.

General Engineering

98. As per IS 456 ∶ 2000, for the design of doubly reinforced beam, the area of compression reinforcement Asc is given by _________,

where,

Mu = ultimate flexural strength of doubly reinforced section

Mu.lim = limiting moment of resistance

fsc = stress in the compression steel

d = effective depth

d’ = depth of compression reinforcement

General Engineering

99. Engineering hydrology does NOT deal with:

General Engineering

100. Signs having red border, white background and black symbols are:

Leave a Comment